922r Compliance for HK G3/HK91, CETME, and clones.

    HK G3/HK91/CETME. The parts highlighted in yellow are the parts that count toward 922(r) compliance.

HK G3/HK91/CETME. The parts highlighted in yellow are the parts that count toward 922(r) compliance.

In order to be in compliance with 922(r), your rifle must have no more than ten foreign-made parts from the following list of parts:

Receiver the stamped steel part that the bolt and carrier are in
Barrel
Mounting block (front trunion) part inside the receiver that the barrel attaches to
Muzzle attachment flash hider or brake
Bolt
Bolt carrier
Operating rod (charging handle)
Trigger housing the box inside the grip frame that holds all the trigger parts
Trigger
Hammer
Sear
Buttstock
Pistol grip
Forearm (handguard)
Magazine body
Follower part that pushes cartridges up inside the mag
Floorplate bottom of the magazine

As long as the rifle has 10 or less foreign-made parts from the above list, it is compliant. If it has 11 or more, it is not.

Foreign made parts that are not on the above list have no impact, and it does not matter how many US-made parts it has, all that matters is that there is no more than 10 foreign parts from the above list.

You can adjust which foreign-made parts you use by switching out other parts for US-made parts, keeping a balance of 10 or less foreign parts from the above list.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s